BUSINESS HOURS

Mon-Fri 7:00AM - 7:00PM
SAT/SUN by appointment only!

FORGOT YOUR PASSWORD?

*

AAH, WAIT, I REMEMBER NOW!

Rubber Tire Hydraulic Excavators 4WD

  • CAT M315C Rubber Tire Excavator 4WD

    Shipping Length of Unit 27.8 ft in 8470 mm

     

     | 

    Shipping Height of Unit10.3 ft in 3150 mm

     

     | 

    Max Loading Height 24 ft in 7300 mm

     

     | 

    Max Reach Along Ground 30.8 ft in 9380 mm

     

     | 

    Max Vertical Wall Dig Depth 13.4 ft in 4090 mm

     

     | 

    Max Digging Depth 20 ft in 6090 mm

     

     | 

    Overall Width 8.4 ft in 2550 mm

     

     | 

    Wheelbase 8.2 ft in 2500 mm 

     

     | 

    Ground Clearance 1.2 ft in 370 mm

     

     | 

    Overall Width - Outriggers Down 12 ft in 3665 mm

     

     | 

    Height to Top of Cab 10.3 ft in 3150 mm 

     

     | 

    Tail Swing Radius 7.2 ft in 2197 mm

     

    Service Refill Capacities

    Hydraulic Tank 36 gal  |  Hydraulic System 60.8 gal (including tank)  |   Cooling 8.5 gal  |  Engine 2.4 gal  |  Rear Axle Housing (Differential) 2.9 gal  |  Front Steering Axle (Differential) 2.1 gal  |  Disk Brakes 0.5 gal  |  Power Shift Transmission 0.8 gal  |  Fuel Tank 62 gal

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

     

     

    Open the book | PDF version

  • CAT M315D Rubber Tire Excavator 4WD

    Overview

    The D Series incorporates innovations for improved performance and versatility. High lifting capacity, short cycle times and ease of operation lead to increased productivity and lower operating costs.

    Engine

    Engine Model Cat® C4.4 with ACERT™ Technology Cat® C4.4 with ACERT™ Technology
    Net Power 137.0 hp 101.0 kW
    Gross Power 147.0 hp 108.0 kW
    Bore 4.1 in 105.0 mm
    Stroke 5.0 in 127.0 mm
    Displacement 268.0 in3 4.4 L
    Cylinders 4 4
    Maximum Torque at 1,400 rpm 405.0 lb ft 550.0 N·m
    Net Power (ISO 9249) at 2,000 rpm (DIN) 137.0 hp 101.0 kW
    Net Power - ISO 9249 137.0 hp 101.0 kW
    Ratings 2000.0 RPM 2000.0 RPM

    Weights

    Dozer Blade 1652.0 lb 750.0 kg
    Outriggers 2114.0 lb 960.0 kg
    Counterweight - Optional 8590.0 lb 3900.0 kg
    Counterweight - Standard 7700.0 lb 3500.0 kg
    Offset Boom* - Front and Rear Outriggers 38623.0 lb 17540.0 kg
    Offset Boom* - Rear Dozer Only 35870.0 lb 16290.0 kg
    Offset Boom* - Rear Dozer, Front Outriggers 37960.0 lb 17240.0 kg
    One-Piece Boom* - Front and Rear Outriggers 36530.0 lb 16590.0 kg
    One-Piece Boom* - Rear Dozer Only 33780.0 lb 15340.0 kg
    One-Piece Boom* - Rear Dozer, Front Outriggers 35870.0 lb 16290.0 kg
    Operating Weight 16 100 to 18 300 kg (35,450 to 40,300 lb) 16 100 to 18 300 kg (35,450 to 40,300 lb)
    Sticks - Long (2600 mm) 1167.0 lb 530.0 kg
    Sticks - Medium (2400 mm) 1132.0 lb 514.0 kg
    Sticks - Short (2100 mm) 1035.0 lb 470.0 kg
    VA Boom* - Front and Rear Outriggers 37630.0 lb 17090.0 kg
    VA Boom* - Rear Dozer Only 34880.0 lb 15840.0 kg
    VA Boom* - Rear Dozer, Front Outriggers 36970.0 lb 16790.0 kg

    Swing Mechanism

    Swing Speed 10.5 RPM 10.5 RPM
    Swing Torque 29500.0 lb ft 40.0 kN·m

    Hydraulic System

    Maximum Flow - Auxiliary Circuit - High Pressure 58.0 gal/min 220.0 L/min
    Maximum Flow - Auxiliary Circuit - Medium Pressure 13.2 gal/min 50.0 L/min
    Maximum Flow - Implement/Travel Circuit 58.0 gal/min 220.0 L/min
    Maximum Flow - Swing Mechanism 21.1 gal/min 80.0 L/min
    Maximum Pressure - Auxiliary Circuit - High Pressure 5076.0 psi 350.0 bar
    Maximum Pressure - Auxiliary Circuit - Medium Pressure 2683.0 psi 185.0 bar
    Maximum Pressure - Implement Circuit - Heavy Lift 5439.0 psi 375.0 bar
    Maximum Pressure - Implement Circuit - Normal 5076.0 psi 350.0 bar
    Maximum Pressure - Swing Mechanism 5366.0 psi 370.0 bar
    Maximum Pressure - Travel Circuit 5076.0 psi 350.0 bar
    System 67.3 gal 255.0 L
    Tank Capacity 35.6 gal 135.0 L

    Transmission

    Drawbar Pull 21825.0 lb 97.0 kN
    Maximum Gradeability 69% 69%
    Creeper Speed - 1st Gear 1.9 mph 3.0 km/h
    Creeper Speed - 2nd Gear 8.0 mph 13.0 km/h
    Forward/Reverse - 1st Gear 5.0 mph 8.0 km/h
    Forward/Reverse - 2nd Gear 21.0 mph 34.0 km/h

    Service Refill Capacities

    Cooling 8.7 gal 33.0 L
    Engine Crankcase 2.1 gal 8.0 L
    Rear Axle Housing (Differential) 3.7 gal 14.0 L
    Front Steering Axle (Differential) 2.8 gal 10.5 L
    Final Drive 0.66 gal 2.5 L
    Powershift Transmission 0.66 gal 2.5 L
    Fuel Tank 63.4 gal 240.0 L

    Tires

    Standard 1) 10.00-20 (dual pneumatic) 1) 10.00-20 (dual pneumatic)
    Optional 1) 11.00-20 (dual pneumatic) 2) 18 R 19.5 XF (single pneumatic) 3) 10.00-20 (dual solid rubber) 1) 11.00-20 (dual pneumatic) 2) 18 R 19.5 XF (single pneumatic) 3) 10.00-20 (dual solid rubber)

    Undercarriage

    Ground Clearance 14.6 in 370.0 mm
    Maximum Steering Angle 35° 35°
    Minimum Turning Radius - End of One-Piece Boom 27.23 ft 8300.0 mm
    Minimum Turning Radius - End of VA Boom 22.64 ft 6900.0 mm
    Minimum Turning Radius - Outside of Tire 20.67 ft 6300.0 mm
    Oscillation Axle Angle ±9° ±9°

    Bucket Specifications

    Bucket Capacities 0.38 to 1.26 m3 (0.5 to 1.65 yd3) 0.38 to 1.26 m3 (0.5 to 1.65 yd3)

    Working Ranges

    Maximum Digging Depth 19.91 ft 6070.0 mm
    Maximum Reach at Ground Level 30.77 ft 9380.0 mm

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

    Open the book | PDF version

  • CAT M316F Rubber Tire Excavator 4WD

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

    Open the book | PDF version

  • CAT M320F Rubber Tire Excavator 4WD

    Overview

    The new F Series generation is here to help you take on the wide variety of challenges you face every day, more easily and with more pleasure. F Series – Easier Than Ever.

    Engine

     
    Engine Model Cat® C7.1 ACERT™ Cat® C7.1 ACERT™
    Net Power 169.0 hp 126.0 kW
    Bore 4.1 in 105.0 mm
    Stroke 5.3 in 135.0 mm
    Displacement 427.8 in3 7.01 L
    Maximum Torque at 1,400 rpm 612.0 lbf-ft 830.0 N·m
    Emissions U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final
    Number of Cylinders 6 6
    Net Power (Maximum) – ISO 9249 at 1,550 rpm 169.0 hp 126.0 kW
    Net Power (Maximum) – ISO 9249/SAE J1349 (metric) (PS) 171.0 hp 126.0 kW
    Net Power (Maximum) – ISO 13496 at 1,550 rpm (gross) 174.0 hp 129.4 kW
    Ratings 1550.0 rpm 1550.0 rpm
    Engine Gross Power (Maximum) – ISO 14396 174.0 hp 129.4 kW
    Engine Gross Power (Maximum) – ISO 14396 (metric) (PS) 176.0 hp 129.4 kW
    Net Power (Rated) – ISO 9249/SAE J1349 169.0 hp 126.0 kW
    Net Power (Rated) – ISO 9249/SAE J1349 (metric) (PS) 171.0 hp 126.0 kW
    Net Power (Rated) – 80/1269/EEC 169.0 hp 126.0 kW
    Net Power (Maximum) – ISO 9249/SAE J1349 169.0 hp 126.0 kW
    Net Power (Maximum) – 80/1269/EEC 169.0 hp 126.0 kW

    Weights

    Weights: VA Boom – Rear Dozer Only 41778.0 lb 18950.0 kg
    Weights: VA Boom – Rear Dozer, Front Outriggers 43982.0 lb 19950.0 kg
    Weights: VA Boom – Front and Rear Outriggers 44423.0 lb 20150.0 kg
    Weights: One-Piece Boom – Rear Dozer, Front Outriggers 42880.0 lb 19450.0 kg
    Weights: One-Piece Boom – Front and Rear Outriggers 43321.0 lb 19650.0 kg
    Weights: Sticks – Medium (2500 mm/8'2") 2050.0 lb 930.0 kg
    Weights: Sticks – Long (2800 mm/9'2") 2138.0 lb 970.0 kg
    Weights: Sticks – Industrial (3300 mm/10'10") 1102.0 lb 500.0 kg
    Weights: Counterweight – Standard 8157.0 lb 3700.0 kg
    Weights: Counterweight – Optional 9259.0 lb 4200.0 kg
    Operating Weight 18 500 kg-20 650 kg (40,785 lb-45,525 lb) 18 500 kg-20 650 kg (40,785 lb-45,525 lb)

    Swing Mechanism

    Swing Speed 10.5 rpm 10.5 rpm
    Swing Torque 35403.0 lbf-ft 48.0 kN·m

    Hydraulic System

    Maximum Flow: Implement/Travel Circuit 78.0 gal/min 294.0 L/min
    Maximum Flow: Auxiliary Circuit – High Pressure 78.0 gal/min 294.0 L/min
    Maximum Flow: Auxiliary Circuit – Medium Pressure 12.9 gal/min 49.0 L/min
    Maximum Flow: Swing Mechanism 29.0 gal/min 110.0 L/min
    Maximum Pressure: Implement Circuit – Normal 5076.0 psi 350.0 bar
    Maximum Pressure: Implement Circuit – Heavy Lift 5366.0 psi 370.0 bar
    Maximum Pressure: Implement Circuit – Travel Circuit 5076.0 psi 350.0 bar
    Maximum Pressure: Auxiliary Circuit – High Pressure 5076.0 psi 350.0 bar
    Maximum Pressure: Auxiliary Circuit – Medium Pressure 3046.0 psi 210.0 bar
    Maximum Pressure: Auxiliary Circuit – Swing Mechanism 4496.0 psi 310.0 bar
    System 63.4 gal 240.0 L
    Tank Capacity 40.4 gal 153.0 L

    Transmission

    Drawbar Pull 23155.0 lb 103.0 kN
    Maximum Gradeability 64% 64%
    Creeper Speed – 1st Gear 1.9 mph 3.0 km/h
    Creeper Speed – 2nd Gear 7.5 mph 12.0 km/h
    Forward/Reverse – 1st Gear 6.2 mph 10.0 km/h
    Forward/Reverse – 2nd Gear 21.7 mph 35.0 km/h

    Service Refill Capacities

    Cooling System 12.4 gal 46.9 L
    Engine Crankcase 4.9 gal 18.5 L
    Rear Axle Housing (differential) 3.7 gal 14.0 L
    Front Steering Axle (differential) 2.8 gal 10.5 L
    Final Drive 0.7 gal 2.5 L
    Powershift Transmission 0.7 gal 2.5 L
    Fuel Tank (total capacity) 109.6 gal 415.0 L
    Diesel Exhaust Fluid Tank 9.1 gal 34.5 L

    Tires

    Standard 10.00-20 (Dual Pneumatic) 10.00-20 (Dual Pneumatic)
    Optional 1) 11.00-20 (Dual Pneumatic); 2) 445/70/R19.5 TL XF (Single Pneumatic); 3) 10.00-20 (Dual Solid Rubber) 1) 11.00-20 (Dual Pneumatic); 2) 445/70/R19.5 TL XF (Single Pneumatic); 3) 10.00-20 (Dual Solid Rubber)

    Undercarriage

    Ground Clearance 14.6 in 370.0 mm
    Maximum Steering Angle 35° 35°
    Minimum Turning Radius: Standard Axle – Outside of Tire 21.0 ft 6400.0 mm
    Minimum Turning Radius: Standard Axle – End of VA Boom 23.0 ft 7000.0 mm
    Minimum Turning Radius: Standard Axle – End of One-Piece Boom 27.2 ft 8300.0 mm
    Minimum Turning Radius: Wide Axle – Outside of Tire 21.5 ft 6500.0 mm
    Minimum Turning Radius: Wide Axle – End of VA Boom 23.3 ft 7300.0 mm
    Minimum Turning Radius: Wide Axle – End of One-Piece Boom 27.9 ft 8500.0 mm
    Oscillation Axle Angle ±8.5° ±8.5°

    Bucket Specifications

    Bucket Capacities 0.35 m3-1.18 m3 (0.46 yd3-1.54 yd3) 0.35 m3-1.18 m3 (0.46 yd3-1.54 yd3)

    Working Ranges

    Maximum Digging Depth 20.8 ft 6330.0 mm
    Maximum Reach at Ground Level 31.4 ft 9580.0 mm

    Drive

    Maximum Travel Speed 22.0 mph 35.0 km/h

    Blade

    Blade Type Parallel Parallel
    Blade Roll-Over Height 22.7 in 576.0 mm
    Width (standard axles) 100.4 in 2550.0 mm
    Width (wide axles) 108.3 in 2750.0 mm
    Blade Total Height 2.2 ft 680.0 mm
    Maximum Lowering Depth from Ground 5.0 in 130.0 mm
    Maximum Raising Height above Ground 1.6 ft 495.0 mm

    Sustainability

    Engine Emissions Tier 4 Final Tier 4 Final
    Fluids (Optional) – Cat Bio HYDO Advanced Readily biodegradable EU Flower eco-label certified Readily biodegradable EU Flower eco-label certified
    Fluids (Optional) – Biodiesel up to B20 Meets EN14214 or ASTM D6751 with EN590 or ASTM D975 Standard Mineral diesel fuels Meets EN14214 or ASTM D6751 with EN590 or ASTM D975 Standard Mineral diesel fuels
    Vibration Levels: Maximum Hand/Arm – ISO 5349:2001 Less Than 2.5 m/s2 (Less Than 8.2 ft/s2) Less Than 2.5 m/s2 (Less Than 8.2 ft/s2)
    Vibration Levels: Maximum Whole Body – ISO/TR 25398:2006 Less Than 0.5 m/s2 (Less Than 1.6 ft/s2) Less Than 0.5 m/s2 (Less Than 1.6 ft/s2)
    Vibration Levels: Seat Transmissibility Factor – ISO 7096:2000-spectral class EM5 Less Than 0.7 Less Than 0.7

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

    Open the book | PDF version

  • CAT M322C Rubber Tire Excavator 4WD

    CAT M322COverview

    The C Series incorporates innovations for improved performance and versatility.

    Engine

     
    Engine Model Cat 3056E ATAAC Cat 3056E ATAAC
    Net Power 164.0 hp 122.0 kW
    Gross Power 170.0 hp 127.0 kW
    Flywheel Power 164.0 hp 122.29 kW
    ISO 9249 164.0 hp 122.0 kW
    EEC 80/1269 164.0 hp 122.0 kW
    Bore 3.9 in 100.0 mm
    Stroke 5.0 in 127.0 mm
    Displacement 366.0 in3 6.0 L
    Cylinders 6 6
    Maximum Torque at 1,400 rpm 512.6 lb ft 695.0 N·m

    Weights

    VA Boom  
    Rear dozer only 46300.0 lb 21000.0 kg
    Rear dozer, front outriggers 49160.0 lb 22300.0 kg
    Front and rear outriggers 50045.0 lb 22700.0 kg
    Rear dozer only 45195.0 lb 20500.0 kg
    Rear dozer, front outriggers 48060.0 lb 21800.0 kg
    Dozer Blade 1985.0 lb 900.0 kg
    Outriggers 2870.0 lb 1300.0 kg
    Counterweight 8598.02 lb 3900.0 kg
    2.2 m (7'3") stick 1278.68 lb 580.0 kg
    2.48 m (8'2") stick 1322.77 lb 600.0 kg
    2.78 m (9'2") stick 1477.1 lb 670.0 kg
    Front and rear outriggers 48940.0 lb 22200.0 kg
    One-Piece Boom  

    Swing Mechanism

    Swing Speed 10.5 RPM 10.5 RPM
    Swing Torque 41525.0 lb ft 56.3 kN·m
    Maximum Flow 29.6 gal/min 112.0 L/min
    Pressure 4496.0 psi 31000.0 kPa

    Cab

    Cab/FOGS option ISO 10262 ISO 10262

    Hydraulic System

    Maximum Pressure  
    Travel circuit 5076.0 psi 35000.0 kPa
    high pressure 4785.95 psi 32998.0 kPa
    normal 5076.0 psi 35000.0 kPa
    medium pressure 450.0 psi 3100.0 kPa
    Implement/travel circuit 92.0 gal/min 350.0 L/min
    high pressure 89.82 gal/min 340.0 L/min

    Transmission

    Maximum Travel Speed 15.5 mph 25.0 km/h
    2nd Gear, Forward 15.5 mph 25.0 km/h
    2nd Gear, Reverse 12.4 mph 20.0 km/h
    Drawbar Pull 25178.6 lb 112.0 kN
    Maximum Gradeability 62% 62%
    Creeper Speed - 1st Gear 2.5 mph 4.0 km/h
    Creeper Speed - 2nd Gear 8.1 mph 13.0 km/h
    Forward/Reverse - 1st Gear 5.6 mph 9.0 km/h

    Service Refill Capacities

    Hydraulic Tank 59.4 gal 225.0 L
    Hydraulic System (including tank) 92.0 gal 350.0 L
    Cooling 10.3 gal 39.0 L
    Engine Crankcase 4.23 gal 16.0 L
    Rear Axle Housing (Differential) 3.83 gal 14.5 L
    Front Steering Axle (Differential) 2.91 gal 11.0 L
    Final Drive  
    Disk Brakes 0.5 gal 2.0 L
    Powershift Transmission 0.66 gal 2.5 L
    Fuel Tank 102.0 gal 385.0 L

    Tires

    Standard 11.00-20 dual pneumatic 11.00-20 dual pneumatic
    Optional 10.00-20 dual solid rubber; 18-R 19.5 XF single 10.00-20 dual solid rubber; 18-R 19.5 XF single

    Fuel Tank

    Fuel Tank Capacity 101.71 gal 385.0 L

    Operating Specifications

     

    Max. Reach at Ground Level 33.86 ft 10320.0 mm
    Travel Speed 15.53 mph 25.0 km/h
    Max Reach at Ground Level, VA Boom 33.33 ft 10160.0 mm
    Max Reach at Ground Level, One Piece Boom 33.86 ft 10320.0 mm
    Bucket Digging Force, VA Boom 29449.97 lb 131.0 kN
    Bucket Digging Force, One Piece Boom 29449.97 lb 131.0 kN
    Max Digging Depth, VA Boom 21.35 ft 6507.0 mm
    Max Digging Depth, One Piece Boom 20.66 ft 6297.0 mm
    Stick Digging Force, VA Boom 25853.02 lb 115.0 kN
    Stick Digging Force, One Piece Boom 25853.02 lb 115.0 kN
    Max Bucket Capacity 1.83 yd3

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

    Open the book | PDF version

  • CAT M322D Rubber Tire Excavator 4WD

    Overview

    The Cat® D Series incorporates innovations for improved performance and versatility. Increased lifting capacity, improved cycle times and ease of operation lead to increased productivity and lower operating costs.

    Engine

     
    Engine Model Cat® C6.6 with ACERT™ Technology Cat® C6.6 with ACERT™ Technology
    Net Power 165.0 hp 123.0 kW
    Gross Power 173.0 hp 129.0 kW
    Bore 4.13 in 105.0 mm
    Stroke 5.0 in 127.0 mm
    Displacement 403.0 in3 6.6 L
    Cylinders 6 6
    Maximum Torque at 1,400 rpm 553.0 lb ft 750.0 N·m
    Net Power - 80/1269/EEC 165.0 hp 123.0 kW
    Net Power - ISO 9249 165.0 hp 123.0 kW
    Net power (ISO 9249) at 2,000 rpm 165.0 hp 123.0 kW
    Ratings 2000.0 RPM 2000.0 RPM

    Weights

    Dozer Blade 2028.0 lb 920.0 kg
    Outriggers 2778.0 lb 1260.0 kg
    Counterweight - Optional 4400/5400 kg (9,700/11,905 lb) 4400/5400 kg (9,700/11,905 lb)
    Counterweight - Standard 8598.0 lb 3900.0 kg
    One-Piece Boom* - Front and Rear Outriggers 45085.0 lb 20450.0 kg
    One-Piece Boom* - Rear Dozer Only 41888.0 lb 19000.0 kg
    One-Piece Boom* - Rear Dozer, Front Outriggers 44533.0 lb 20200.0 kg
    Operating Weight 19 500 to 23 500 kg (42,990 to 51,809 lb) 19 500 to 23 500 kg (42,990 to 51,809 lb)
    Sticks - Long - 2900 mm (9'6") 1720.0 lb 780.0 kg
    Sticks - Medium - 2500 mm (8'2") 1543.0 lb 700.0 kg
    Sticks - Short - 2200 mm (7'3") 1433.0 lb 650.0 kg
    VA Boom* - Front and Rear Outriggers 46518.0 lb 21100.0 kg
    VA Boom* - Rear Dozer Only 43321.0 lb 19650.0 kg
    VA Boom* - Rear Dozer, Front Outriggers 45966.0 lb 20850.0 kg

    Swing Mechanism

    Swing Speed 9.0 RPM 9.0 RPM
    Swing Torque 41303.0 lb ft 56.0 kN·m

    Hydraulic System

    Maximum Flow - Auxiliary Circuit - High Pressure 55.0 gal/min 250.0 L/min
    Maximum Flow - Auxiliary Circuit - Medium Pressure 13.0 gal/min 50.0 L/min
    Maximum Flow - Implement/Travel Circuit 92.0 gal/min 350.0 L/min
    Maximum Flow - Swing Mechanism 30.0 gal/min 112.0 L/min
    Maximum Pressure - Auxiliary Circuit - High Pressure 5076.0 psi 350.0 bar
    Maximum Pressure - Auxiliary Circuit - Medium Pressure 2683.0 psi 185.0 bar
    Maximum Pressure - Implement Circuit - Heavy Lift 5439.0 psi 375.0 bar
    Maximum Pressure - Implement Circuit - Normal 5076.0 psi 350.0 bar
    Maximum Pressure - Swing Mechanism 4931.0 psi 340.0 bar
    Maximum Pressure - Travel Circuit 5076.0 psi 350.0 bar
    System 92.0 gal 350.0 L
    Tank Capacity 58.0 gal 220.0 L

    Transmission

    Drawbar Pull 25179.0 lb 112.0 kN
    Maximum Gradeability 60% 60%
    Creeper Speed - 1st Gear 2.0 mph 3.0 km/h
    Creeper Speed - 2nd Gear 7.5 mph 12.0 km/h
    Forward/Reverse - 1st Gear 4.0 mph 7.0 km/h
    Forward/Reverse - 2nd Gear 16.0 mph 25.0 km/h

    Service Refill Capacities

    Cooling 9.8 gal 37.0 L
    Engine Crankcase 4.0 gal 15.0 L
    Rear Axle Housing (Differential) 3.7 gal 14.0 L
    Front Steering Axle (Differential) 2.9 gal 11.0 L
    Final Drive 0.7 gal 2.5 L
    Powershift Transmission 0.7 gal 2.5 L
    Fuel Tank 102.0 gal 385.0 L

    Tires

    Standard 1) 11.00-20 (dual pneumatic) 1) 11.00-20 (dual pneumatic)
    Optional 1) 10.00-20 (dual solid rubber) 1) 10.00-20 (dual solid rubber)

    Undercarriage

    Ground Clearance 15.0 in 380.0 mm
    Maximum Steering Angle 35° 35°
    Minimum Turning Radius - Standard Axle - End of One-Piece Boom 30.5 ft 9300.0 mm
    Minimum Turning Radius - Standard Axle - End of VA Boom 25.5 ft 7800.0 mm
    Minimum Turning Radius - Standard Axle - Outside of Tire 22.0 ft 6800.0 mm
    Oscillation Axle Angle ±9° ±9°

    Bucket Specifications

    Bucket Capacities 0.44 to 1.57 m3 (0.57 to 2.05 yd3) 0.44 to 1.57 m3 (0.57 to 2.05 yd3)

    Working Ranges

    Maximum Digging Depth 21.92 ft 6680.0 mm
    Maximum Reach at Ground Level 33.86 ft 10320.0 mm

    Drive

    Maximum Travel Speed 15.6 mph 25.0 km/h

     

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE

    Open the book | PDF version

TOP